一种蓝色荧光材料的合成

本文设计和合成了一种带有吡唑啉侧链基因的低聚酰胺,可用作蓝色荧光材料。分子中特殊的氢键序列(AADADD)及芳酰胺链可与制着器件所用的高分子基材分子之间的形成较强的作用力,从而将发光基团“铆定”在功能膜中。     

Headspace Solid-phase Microextraction–Gas Chromatographic–Mass Spectrometric Analysis of the Essential Oils of Two Traditional Chinese Medicines, Angelica pubescens and Angelica sinensis

Angelica pubescens and Angelica sinensis belong to the Umbelliferae family and both are used as traditional Chinese medicines. In the present study, headspace solid-phase microextraction (HS-SPME) with gas chromatography-mass spectrometry (GC-MS) was used for the analysis of the volatile constituents present in their roots. Eighty-seven compounds in Angelica pubescens and thirty-six compounds in Angelica sinensis were identified by GC-MS. Their relative contents were calculated by the peak area ratio. HS-SPME was compared to steam distillation (SD) by analyzing the volatile constituents of Angelica sinensis root. A good agreement between results obtained with both techniques was found. As a conclusion, HS-SPME is a powerful tool for determining the volatile constituents present in the TCMs.     

Amine-templated metal squarates

Two layered amine-templated cobalt squarates, [C₆N₂H₁₄]₂[Co₂(C₄O₄)₃(H₂O)₄], I, and [C₃N₂H₅]₂[Co₂(C₄O₄)₃(H₂O)₄], II, have been prepared under hydrothermal conditions. Both I and II contain chains formed by dimers comprising two cobalt atoms bound to the squarate units, the chains being connected through hydrogen bond interactions. An amine-templated cobalt squarate of the formula [C₄N₂H₁₂][Co(C₄O₄)₂(H₂O)₄][H₂O]₂, III, as well as its Ni, Zn and Cd analogues have been prepared by room temperature reactions. III has a layered architecture wherein the cobalt-squarate monomers are linked by the amine molecules. Co and Zn analogues of [Ni(C₄O₄)(H₂O)₂(C₃N₂H₄)] with ligating imidazole units have also been prepared and characterized.     

铜基催化剂的结构、物性及其对混合碳四选择加氢反应的催化性能

 用XRD，XPS，SEM和H2－TPR等手段研究了铜基负载型催化剂的结\r\n构和物性及其对混合碳四加氢脱炔的催化性能．结果表明，在负载铜催\r\n化剂中加入一定量的Co可提高催化剂的加氢脱炔活性，而Co含量较少时\r\n加入少量的Ce也能提高催化剂的活性和选择性．Cu和Co之间存在着相互\r\n协同作用，使得活性组分在催化剂表面偏析，CuO在催化剂表面呈非晶\r\n相分散状态，催化剂颗粒粒径变小，催化剂更容易被还原，从而改善了\r\n催化剂的催化性能．     

Synthesis, Structure and Optical Properties of Cerium(Ⅲ) Triphosphate CeP3O9

The single crystal and crystallized powder of triphosphate CeP3O9 have been synthesized, and the space group of CeP3O9 has been determined to be C2221 with the cell parameters ofa = 8.6059, b = 11.2437, c = 7.3518 (A), V= 711.4(3) (A)3, Z= 4, Dc = 3.520 g/cm3, F(000) = 700,R = 0.0377 and wR = 0.0930. The absorption and emission spectra have been measured, for which the strongest absorption and emission peaks are located at 280 and 320 nm, respectively. The density of state (DOS) and dielectric function have been calculated by the DFT method. The crystal is transparent provided the wavelength is larger than 341 nm, and the observed ultraviolet cut-off edge is at about 350 nm for a polycrystalline power sample. It is possible that the triphosphate CeP3O9 will become an ultraviolet emission material.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

柱前衍生高效液相色谱法测定四氢噻唑-2-硫酮-4-羧酸的光学纯度

用苯胺对四氢噻唑-2-硫酮-4-羧酸(TTCA)进行柱前衍生,将其衍生物在手性固定相上拆分,通过二极管阵列紫外检测器和在线旋光检测仪对其衍生物进行检测,建立了一种拆分TTCA消旋体、测定TTCA光学纯度的新方法。以正己烷和乙醇或异丙醇为流动相,在DNB-Leucine手性固定相上对TTCA衍生物进行了拆分,并考察了流动相组成和柱温对其衍生物分离的影响,获得较优分析条件,分离因子大于1.2。非手性试剂苯胺柱前衍生化法测定(R)-TTCA的光学纯度与旋光度方法比较,结果一致,相对偏差小于1.34%。     

SYNTHESIS, STRUCTURE AND ELECTROCHEMICAL STUDIES ON SINGLE MoFe_3S_4 AND WFe_3S_4 CUBANE-TYPE CLUSTER COMPOUNDS*

Single cubane-like clusters, MFe_3S_4(R_2dtc)_5 (M=Mo, R_2=—(CH_2)_4—, Bz_2; M=W, R_2=Me_2, —(CH_2)4—; dtc=dialkyldithiocarbamate) were synthesized by assembly reaction of (NH_4)_2MS_4 (M=Mo, W), FeCl_2 with R_2dtcNa (or NH_4) in DMF. The structure, IR, EPR and cyclic voltammogram are described and discussed. MoFe_3S_4(C_4H_8dtc)_5 was also obtained from the conversion of linear cluster Fe(DMF)_6[(FeCl_2)_2MoS_4] in the presence of C_4H_8dtc NH_4. Both clusters MoFe_3S_4(C_4H_8dtc)_4·2C_2H_5CN and WFe_3S_4(C_4H_8dtc)_5·2DMF crystallize in the monoclinic space group C2/c with a=12.544(2), (Mo-cluster), 12.533(4) (W-cluster); b=20.478(4), 20.121(6); c=19.582(7), 19.659(2);β=102.82(2), 102.96(3)°; and Z=4, 4. Their structures were refined to R=0.057 and 0.064 with use of 2690 and 2179 reflections (ι>3Q(I)), respectively. Many similarities in structure for Mo and W clusters indicate that both Mo and W play a very similar role in the clusters.     

Improved hygrothermal durability of flax/polypropylene composites after chemical treatments through a hybrid approach

There are growing research interests in flax fibers due to their renewable ‘green’ origin and high strength. However, these natural fibers easily absorb moisture and have poor adhesion with polymer matrix leading to low interfacial strength for the composites. A hybrid chemical treatment technique combining alkali (sodium hydroxide) and silane treatments is adopted in the current study to modify flax fibers for improved performances of flax/polypropylene composites. Changes in chemical composition, microstructure, wettability, surface morphology, crystallinity and tensile properties of single flax fiber before and after chemical treatments were comprehensively characterized using techniques including SEM, FTIR, AFM, XRD, micro-fiber tester, etc. It was found that hemicellulose and lignin at the fiber surface were removed due to alkali treatment, which helped to reduce moisture absorption of the composites. Alkali-treated flax fibers were later subjected to silane treatment, which helped to improve the compatibility between flax fiber and polypropylene matrix. After alkali-silane hybrid chemical treatment, moisture absorption of the composites was further decreased. At the same time, the interfacial bonding strength between flax and polypropylene is significantly enhanced. All these results validate the great advantage of the hybrid chemical treatment approach for flax/polypropylene composites, which has the potential to promote the application of chemical treatment techniques in the plant fiber composite industry.

Graphic abstract